Wood Framed Boards Hanging Instructions
(click here for print-friendly version)

Use provided hangers to mount boards to a solid wall surface. When hanging board, make sure you attach the hangers to the side pieces of the wood molding. Do not hang board by the top piece. (see Fig.1) The board is designed so you may hang the board either horizontally or vertically. Nail or screw the hangers to the board with the triangles pointing up. Put nails or screws (not provided) into wall at desired location and hang board over ends.

Plastic Framed Board Mounting Instructions
(click here for print-friendly version)

Choose one of the following mounting options to hang your board.

MAGNETS: Use with boards up to 11"x17" for mounting on any metal surface.
TO USE: Apply a piece of tape to each of the four pieces of magnets. Remove the tape backing from adhesive to adhere the magnet to each side of the four corners as shown in the diagram. Hang board on refrigerator or other metal surface.

---

DOUBLE SIDED FOAM TAPE: Use with boards up to 11"x17" for mounting on smooth wall surfaces.
TO USE: Apply one piece of foam tape to each of the four corners, as show in the diagram. Remove the tape backing and position on the wall. Press firmly on all four corners.

---